With that said you are fretting over something that probably won’t matter and that is the ethernet port speed. Your current router only has gigabit ports and the router can only pass data from the LAN to the WAN at speeds fast enough to saturate your internet connection speeds. The only advantage of 2.5gbps on the router would be IF you are running multiple vLAN’s. Since you are already using the router as a point for your switch to connect to the internet you are already limited to 1Gbps speeds.
Install OpnSense on the device you have available, set it up for the basics (DHCP reservations, IP addresses for the LAN, etc.), change the ip address in the original router to something that will work with your new setup and turn off the DHCP server. Then do some testing with your new router and see what you think. The old router will work as an ok access point and switch for now, grab a cheap switch to expand if you need to since the WAN port on the archer will no longer be usable.
Later on when you have some extra cash you can grow and expand where you feel the need. I’m using 10Gbps for my backbone with 1Gbps Dell 5548 PowerConnect switches for the majority of devices. You can get the PowerConnect switches on ebay for around 50 to 100 bucks easily. Most clients don’t need more than 1Gbps (even 4k cameras) and a 10Gbps card dropped in your server will give you great speeds for cheap. An Intel X520 10G NIC can be picked up for 30 bucks add a couple sfp+ modules for about 10 each plus an OM3 fiber cable for a few bucks and you are set for a while. If you get a Dell PowerConnect 5548P (the P makes it a POE switch) and you can power POE cameras and POE access points without anything extra and still use the rest of they’re ports for regular computer connections.
Comments
I’m a bare metal guy when it comes to routers.
With that said you are fretting over something that probably won’t matter and that is the ethernet port speed. Your current router only has gigabit ports and the router can only pass data from the LAN to the WAN at speeds fast enough to saturate your internet connection speeds. The only advantage of 2.5gbps on the router would be IF you are running multiple vLAN’s. Since you are already using the router as a point for your switch to connect to the internet you are already limited to 1Gbps speeds.
Install OpnSense on the device you have available, set it up for the basics (DHCP reservations, IP addresses for the LAN, etc.), change the ip address in the original router to something that will work with your new setup and turn off the DHCP server. Then do some testing with your new router and see what you think. The old router will work as an ok access point and switch for now, grab a cheap switch to expand if you need to since the WAN port on the archer will no longer be usable.
Later on when you have some extra cash you can grow and expand where you feel the need. I’m using 10Gbps for my backbone with 1Gbps Dell 5548 PowerConnect switches for the majority of devices. You can get the PowerConnect switches on ebay for around 50 to 100 bucks easily. Most clients don’t need more than 1Gbps (even 4k cameras) and a 10Gbps card dropped in your server will give you great speeds for cheap. An Intel X520 10G NIC can be picked up for 30 bucks add a couple sfp+ modules for about 10 each plus an OM3 fiber cable for a few bucks and you are set for a while. If you get a Dell PowerConnect 5548P (the P makes it a POE switch) and you can power POE cameras and POE access points without anything extra and still use the rest of they’re ports for regular computer connections.
Sign in to comment. Sign in