Skip to content

Comment on Linux Mint Installation Issues on a Lenovo Yoga C930

You are viewing one comment and its replies. View all comments

Comments

  • @dan@upvote.au· · edited

    Try turning off secure boot in the BIOS.

    One other possibility is that the USB is corrupted. Unfortunately, Rufus doesn’t verify that the data was copied to the USB properly. Try using balenaEtcher instead of Rufus, since (as far as I can remember) it has an option to verify that the write was successful.

    13
    • Thanks for the suggestion!

      I don’t see an option in the BIOS to turn off the secure boot to do anything other than booting into the USB (hopefully the below image actually works). Seems like something I should have turned off before I tinkered though.

      https://lemmy.ca/pictrs/image/13839dcb-6673-488a-a571-30b7c50e60f2.jpeg

      I’ll give balena a try and see if that can actually boot from the state its in.

      1
      • Thats the boot manager not the BIOS? You need to go into the BIOS to disable secure boot. You need to press F2 immediately on restart. The BIOS has many more options including disabling secure boot and setting up a default boot order

        The boot manager is accessed via F12 and only shows you available devices to boot based on the rules in the BIOS.

        I installed Linux (Opensuse) on a Lenovo Yoga recently. I disabled secure boot prior to install and enabled USB boot to get the installer running.

        Your linux install failed as it didnt complete so its best to reinstall completely, and I agree with the prior poster: use balena etcher to make a fresh USB stick and verify the ISO is intact. Or Ventoy is a good tool to set up a USB stick with too - you can drop isos onto a USB stick and pick whichever one you want to boot from. But if using ventoy, still.manually verify the downloaded Mint ISO matches the original online file using the provided SHA on its download page.

        9
        • Thank you for clarifying that, I did not realize I was not in the BIOS menu there (very inexperienced at tinkering with computers as you can tell)

          I validated the ISO and downloaded balena. Flashing the USB drive now and will try that out.

          1

Sign in to comment. Sign in