I don’t see an option in the BIOS to turn off the secure boot to do anything other than booting into the USB (hopefully the below image actually works). Seems like something I should have turned off before I tinkered though.
Thats the boot manager not the BIOS? You need to go into the BIOS to disable secure boot. You need to press F2 immediately on restart. The BIOS has many more options including disabling secure boot and setting up a default boot order
The boot manager is accessed via F12 and only shows you available devices to boot based on the rules in the BIOS.
I installed Linux (Opensuse) on a Lenovo Yoga recently. I disabled secure boot prior to install and enabled USB boot to get the installer running.
Your linux install failed as it didnt complete so its best to reinstall completely, and I agree with the prior poster: use balena etcher to make a fresh USB stick and verify the ISO is intact. Or Ventoy is a good tool to set up a USB stick with too - you can drop isos onto a USB stick and pick whichever one you want to boot from. But if using ventoy, still.manually verify the downloaded Mint ISO matches the original online file using the provided SHA on its download page.
Comments
Thanks for the suggestion!
I don’t see an option in the BIOS to turn off the secure boot to do anything other than booting into the USB (hopefully the below image actually works). Seems like something I should have turned off before I tinkered though.
https://lemmy.ca/pictrs/image/13839dcb-6673-488a-a571-30b7c50e60f2.jpeg
I’ll give balena a try and see if that can actually boot from the state its in.
Thats the boot manager not the BIOS? You need to go into the BIOS to disable secure boot. You need to press F2 immediately on restart. The BIOS has many more options including disabling secure boot and setting up a default boot order
The boot manager is accessed via F12 and only shows you available devices to boot based on the rules in the BIOS.
I installed Linux (Opensuse) on a Lenovo Yoga recently. I disabled secure boot prior to install and enabled USB boot to get the installer running.
Your linux install failed as it didnt complete so its best to reinstall completely, and I agree with the prior poster: use balena etcher to make a fresh USB stick and verify the ISO is intact. Or Ventoy is a good tool to set up a USB stick with too - you can drop isos onto a USB stick and pick whichever one you want to boot from. But if using ventoy, still.manually verify the downloaded Mint ISO matches the original online file using the provided SHA on its download page.
Thank you for clarifying that, I did not realize I was not in the BIOS menu there (very inexperienced at tinkering with computers as you can tell)
I validated the ISO and downloaded balena. Flashing the USB drive now and will try that out.
Sign in to comment. Sign in